R-U8 Module 8 optically isolated digital outputs
Overview
The R-U8 module has 8 optically isolated digital outputs, type PNP, 24 VDC-3A, and can be used to send signals and OKs to electronic devices, directly power loads in VDC within the limits of rated currents, or control loads of any kind via solid state relay, contactors, etc.
The outputs have the GND terminal in common and are divided into 4 groups of 2 outputs with 4 separate power supplies and maximum capacity of 5A per group, 15A total for the module.
Division into groups creates circuits that are independently sectionable by external devices.
Each output is protected against short-circuit, overload, and overheating, and has current recycle circuitry for inductive loads and state signal LEDs.
The R-U8 is installed on the backplanes of the series R-BUS(x) from which it receives its power supply.
- Description
- Reviews (0)
Description
Description
- 8 3A max. outputs
- Max. load for module 15A
- Short-circuit and overload protection on all outputs
- Diagnostics LED for power supplies, outputs and alarm
- Power supply to 24 VDC outputs
- Removable connector supplied
- In Conformity with UL508
Be the first to review “R-U8 Module 8 optically isolated digital outputs”
Related Products
-
Plastic extrusion template
Overview
Plastic Extrusion Template is a preconfigured application software for scalable control of a single extruder up to a complete extrusion line.
The Template provides management of a maximum of 128 temperature control zones, Master/Slave motor control with synchronism, and closed loop melt pump control.
Innovative solutions for efficient power management have been introduced for temperature control. Based on its many years of experience in extrusion control, Gefran has developed dedicated energy optimization controls for two phases of the extrusion process: a first Warm-up phase, with Energy Saving function, and a second Production phase, with Smart Power Manager function.In addition to standard extrusion functions, the Template provides a series of automation functions:
- Active and historical alarms management
- User management
- Recipe management (configuration and production)
- Multilanguage management
- Preventive maintenance management
- Graphs for temperature and analog trends
- Operator access log
- Weekly clock for temperature control activation
- Remote access
- Connection to HMI/Scada via Modbus TCP
The Template software is open-source code for easy customization of the graphic interface and of machine control.
-
eKM32
-
R-C3 Module with 3 inputs, encoders and counters
Overview
The R-C3 module has 3 independent 32 bit counters, each with 3 optically isolated digital inputs.
For each counter you can:
– program operating mode: up/down counting, mono and bidirectional encoder, or measurement of period or frequency.
– select the digital filter (from 100Hz up to 400KHz)
Each counter has:
– 3 LEDs to signal state of digital inputs
– 8 pin connector for independent wiring of inputs
If used with encoder, the module (powered externally from a front connector)
provides the power supply to the individual connectors and can be configured by encoder type (Differential, Single Ended, Push-Pull, Open Collector).
The module also has interrupts on the level controllable via software.
The R-C3 is installed on the backplanes of the R-BUS(x) series, from which it receives its power supply. -
CAN-IO Extrusion
Overview
Compact remote IO modules with CANopen communication (device profile DS401, communication profile DS301 v. 4.02),
Optisolated CAN port optisolated and diagnostic led, power supply 24 V DC.
Several digital/analog IO integrated on the single module. -
R-GCANs Canbus CANopen slave gateway module
Overview
R-GCANs is a communication module with CANopen protocol for the GILOGIKII family. It has 1 CAN channel to control 1 GILOGIK II node with a maximum of 16 I/O modules. It interfaces with any device equipped with CANopen DS301. Maximum communication speed is 1 Mbaud configurable via software. The numbering of slaves up to 99 gives a total potential of approx. 25,000 I/O on the CAN network. R-GCANs provides power to the entire GILOGIK II node. The GILOGIKII node is configured by means of the Grafinet Studio package, a simple and intuitive tool that generates node composition. R-GCANs is supplied complete with EDS configuration files -
R-EU32 Module with 16 digital inputs + 16 digital outputs
Overview
The R-EU32 is a mixed module with 16 digital inputs and 16 digital outputs, used for completing system configuration with a single board and/or for saving space on the backplane.
Optically-isolated 24 VDC PNP inputs acquire logic signals from proximity sensors, drives, etc.
Each input is protected against polarity inversion.
Optically-isolated 24 VDC PNP outputs transmit signals and clearances to electronic devices, drive loads directly in VDC within limits of rated currents, or control loads of any kind via solid state relay, contactors, etc.
The outputs are divided into 2 groups of 8, with individual power supply and 3A maximum current.
Total current for the module is 6A.
Each output is protected against short circuit, overload, and overtemperature, with current recirculation circuitry for inductive loads.
The presence of the input and/or output is signaled by lighting of its 2-color LED.
R-EU32 installs on the RBUS(x) backplane, from which it is powered. -
GF_VEDO SL 35CT
Overview
The integrated Controller and Operator Panel allows the complete management of automation. Available in 3 versions (6 models), and equipped with a powerful 400 MHz processor.
It is destined mainly to operate in an industrial environment on the control panels of production process machines or processes.
The operator interacts through a colour touch screen. Depending on the model, the size of the screen is 3.5” or 7” wide.
As an option, the device can be equipped with programmable function buttons.
Thanks to its numerous communication ports (some of which are optional), it is possible to connect a wide range of devices to the controller, such as computers, barcode readers, USB sticks, modems, printers, etc., and connect it to an Ethernet network.
The remote input and output modules (CAN-IO/GILOGIK II) are connected by bus to the CAN port (CANopen).
Other CANopen standard compliant devices can also be connected to the bus. -
R-MA6 Module with 6 analog inputs + 6 analog outputs
Overview
The R-MA6 is a mixed module with 6 analog inputs and 6 analog outputs.
It controls 6 analog inputs configurable for potentiometer, voltage, current and strain-gauge, satisfying the applicative needs of common transducers used in industrial applications.
The conversion system is sequential on the 6 channels.
Analog-digital conversion is at 16 bits.
The board can be software programmed to run intercepts and launch interrupts to the MASTER CPU.
It also controls 6 analog outputs in bipolar voltage ± 10V with maximum current of 20mA per output.
The outputs have 16 bit resolution.
They are protected against short circuit and overload by an electronic system.
The module has output diagnostics to check correct function. -
ePCLogic400
Overview
- Graphic, PLC and IOs integrated in a single compact unit
- Compact solution (L<300 mm)
- Locally expandable
- Modular cards
- Scalable
- Easily installable, DIN rail mounting
-
GF_Project VX
Overview
GF_Project VX is an integrated development environment (IDE) for real time control applications based on Gefran automation platform Gcube Performa and Gcube Modula, stand alone PID controller, Power controller, Drive and Sensor devices.
GF_Project VX includes all the tools useful for the configuration of different type of Automation project and for other project phase like commissioning, software maintenance, service and integration.GF_Project VX can:
- Develop automation solutions by protecting the investment allocated to configuration of the application and reducing time to market
- Create applications for complete control of machines and plants and for configuration of graphic interface
- Develop multiplatform solution
- Cut learning time, provide guided development and eliminate configuration errors by exploiting graphic configuration
- Easily reuse parts of existing projects
Thanks to various types of graphic interfaces, the programmer is given the best and most effective tools to develop an automation project. This provides you with a “visual” and “plug-and-play” approach, thanks to which project configuration is completely graphic and guided.
Reviews
There are no reviews yet.