Annunciator relay:RV series
RV series provides general-purpose annunciator relays capable of forming even complex system for the signs of defect indication at a low cost.
Various alarm display patterns can be accommodated by using the extensive product lineup and combining them with JH13PN-type flicker relays.
- Reviews (0)
- Features
- Types and Ratings
Be the first to review “Annunciator relay:RV series”
Design features
- Wide variety of display patterns
- Compact design
- Surge absorber provided
The operating coil is equipped with a surge absorber to suppress surges from the annunciator relay.
Accordingly, high-sensitivity relays or semiconductors prone to malfunction or damage due to surge voltage can be safely connected to the annunciator circuit. - High dielectric strength
High dielectric strength property of 2000 VAC for 1 minute is provided. - Different electric potentials allowed for operation and output
The operating and output circuits have been completely separated, which allows them to be used at different electric potentials. - Auxiliary contact provided for entire product category
Auxiliary contacts have been added to each type and the terminal nos. standardized for the operating, output and auxiliary terminals for improved ease of use. - High reliability and long life expectancy
The relays used are the time-tested HH54B-type, accommodating different electric potentials and offering high reliability and long life expectancy.
Specifications/Annunciator relays
Sockets
Related Products
-
Flicker relays:JH series
JH series provides flicker-operation-type relays for AC/DC common use.
The JH Series relays operate at an intermittent cycle of 600 ms. Combining them with the RV Series annunciator relays expands the variation of failure display.
-
Miniature power relays:HH62,63,64 series
Compact and light weight power relay with 10A contact rating
Product line with 2 poles, 3 poles, and 4 poles under 10A of high capacity contact rating
-
Pushbuttons, Pilot lights: AH164, 165, 165-2 series
Panel cutout 16mm, easy replacement and adding of contacts
The 16mm dia. series of compact size pushbuttons are ‘finger-size’,and consequently take up little panel space. AH165-2 series operators are about twice as large as the AH164 and AH165 series operators for easier operation. With many types of operator available, the most suitable switch can be identified by color, shape and legend, and have a smooth, quality “snap-action”. In spite of their small size they have a highly reliable mechanism, and are eminently suited for solid state and other electronic circuits.
Summary:
AH164 and AH165
UL508
CSA C22.2 No.14
TÜV: EN60947-5-1
EN60947-5-5（Emergency pushbutton )
CCC:GB14048.5AH165-2
UL508
CSA C22.2 No.14
TÜV: EN60947-5-1CCC:GB14048.5
-
Inductive proximity switches Cylindrical type: PE series “PE1-C, PE1-Y and PE2-C”
This proximity switch has a cylindrical shape. The sensor is fitted to an end of the cylinder and the body is provided with a built-in control circuit.
PE1-C, PE1-Y series
DC supply/3-wire and 2-wire system AC supply/2-wire system
Operating distance: 0.8 to 20mm.
This proximity switch has a cylindrical shape.
The sensor is fitted to an end of the cylinder and the body is provided with a built-in control circuit.
This type conforms to the requirements of the CENELEC (Europe) Standards and as the dimensions, ratings and performance comply with the requirements of these Standards, this type can be used as replacement units.PE2-C series
The lineup of PE2-C series proximity switches has been augmented by the addition DC 3-wire system switches withNPN and PNP transistor outputs and 2-wire system switches usable for both AC and DC applications. -
Display lights:DP24, 36, 40, 48 series
Improved safety achieved by excellent visibility and unified structure with quick terminal and live section cover.
High luminance with brilliant colors (LED illuminated products), pure white and blue products are available. Significant reduction of power consumption and product mass.
Fuji Electric’s unique quick terminal and live section cover in a single unit facilitate efficient wiring and improved safety. -
Photoelectric switches slot-type:PH8AU series
Slot-type photoelectric switches ideal for conveyer application, such as elevators.
Slot-type photoelectric switches ideal for conveyer application, such as elevators and multi-level parking lifts. The emitter and receiver are constructed as a single unit, eliminating the need to adjust the optical axis or sensitivity. Same mounting method as our slot-type magnetically operated reed switches (type PM1U).
-
Relay and terminal module:RS series
Slim RS4, RS6 type model with 34mm width
RS16 type model with 16 contact compact terminal relay with industry’s narrowest width■Relays-and-terminal module RS4 , 6N
A very compact, space-saving terminal module containing four or six relays with one NO contact.■Relays-and-terminal module RS16
16-point relays-and-terminal module with the smallest widthin its class. -
Pushbuttons, Pilot lights:AM22/DM 22 series
Added a front tightening nut system model to the Φ22 series.
The full range of the contact blocks and transformer units suitable for the AR22 and DR22 series may also be fitted to the AM22 and DM22 series. Easy to add or replace name plate and etc., by front tightening nut system. Safer model with metal nut is also available. -
Pushbuttons, Pilot lights:AR22/DR22 series
By adopting the release arm system, ingenious super-effortless mounting is implemented, with consideration of work efficiency.
The AR22 now uses a release arm with a wedge mechanism developed by FujiElectric FA. This enables you to mount or remove the operator and contact block without using any tools. When fitting the switch to a panel, you can ignore the panel thickness. You have only to secure the
operator with a locking nut from behind the panel without any need for adjustment.
-
Proximity switches, Magnetically operated reed switches slot type:PM1U series
Slot type switches ideal for conveyer application such as elevators or multi-level parking lifts.
Due to its stable characteristic ensured by the 35mm of slot insertion depth.
This is the optimum choice for locating ferromagnetic-material plate passing through the switch slot.
Reviews
There are no reviews yet.