Annunciator relay:RV series
RV series provides general-purpose annunciator relays capable of forming even complex system for the signs of defect indication at a low cost.
Various alarm display patterns can be accommodated by using the extensive product lineup and combining them with JH13PN-type flicker relays.
Card relay:RB series
Compact card relay for print board with low height and narrow width
The RB 104 and 105 relays are designed for printed circuit board use. These relays are extremely thin (5mm) and so, can be densely mounted on PC boards. As a result, PC board size and cost can be greatly reduced. Employing of bifurcated contacts ensure high contact reliability, allowing the RB104, 105 relays to be used in low-level circuits. Coil voltages are available in ranges from 4.5V to 24V DC.
Display lights:DP24, 36, 40, 48 series
Improved safety achieved by excellent visibility and unified structure with quick terminal and live section cover.
High luminance with brilliant colors (LED illuminated products), pure white and blue products are available. Significant reduction of power consumption and product mass.
Fuji Electric’s unique quick terminal and live section cover in a single unit facilitate efficient wiring and improved safety.
Flicker relays:JH series
JH series provides flicker-operation-type relays for AC/DC common use.
The JH Series relays operate at an intermittent cycle of 600 ms. Combining them with the RV Series annunciator relays expands the variation of failure display.
General purpose relays:HH22,23,24 series
Control relay with wide selection of applied models.
These high quality general purpose relays are suitable for multi-pole switching and, although economically priced, are dependable and sturdily constructed.
They are available with coil voltages 24–130V DC and 24–240V AC with continuous current ratings of either 4 or 6 Amps.
Standard contact buttons are silver.
Contact arrangements are 2PDT, 3PDT and SPDT+2NO+1NC.
Relays are enclosed in a polycarbonate dust cover with octal type 8 or 11 pin plugs.
Inductive proximity switches Cylindrical type: PE series “PE1-C, PE1-Y and PE2-C”
This proximity switch has a cylindrical shape. The sensor is fitted to an end of the cylinder and the body is provided with a built-in control circuit.
PE1-C, PE1-Y series
DC supply/3-wire and 2-wire system AC supply/2-wire system
Operating distance: 0.8 to 20mm.
This proximity switch has a cylindrical shape.
The sensor is fitted to an end of the cylinder and the body is provided with a built-in control circuit.
This type conforms to the requirements of the CENELEC (Europe) Standards and as the dimensions, ratings and performance comply with the requirements of these Standards, this type can be used as replacement units.
The lineup of PE2-C series proximity switches has been augmented by the addition DC 3-wire system switches withNPN and PNP transistor outputs and 2-wire system switches usable for both AC and DC applications.
Inductive proximity switches Flat type: PE-X series “PE-X3D, PE-X15D”
•Only 7mm thick
•Easy-to-mount thin inductive type proximity switches.
Operating system:DC supply/3-wire system
Operating distance: 3mm
•DC supply/3-wire, 12/24V DC
•Operating distance: 15mm
Inductive proximity switches Slim type:PE-T series
•Unique “Magnetic Shield Method”permits side-by-side mounting
•Only 12mm thick – achieved with IC
•Built-in reverse polarity and surge voltage protection
12 millimeters thin structure, capable of continuous dense side-by-side mounting.
Supply voltage: 12/24V DC, 120/240V AC
Output capacity: Max. 200mA
Inductive proximity switches Slot type:PE-U series
Best suited for detection of magnetic metal plates passing through the slot.
•Operating distance: 7mm and 10mm
•Operating voltage range: 10 to 30V DC
•Suitable for detecting of ferromagnetic materials
Inductive proximity switches Square type: PE-B series
Square type for easy set-up
Wide product range from a super compact type of 4mm operating distance to a 50 mm long distance model
•4mm to 50mm operating distance
•Types with operating distance exceeding 20mm conform to theCENELEC Standard.
•Operating voltage range:80 to 250V AC or 10 to 30V DC
Instantaneous stop restart relay:MB4 series
Ideal for use in restarting motor after an instantaneous power failure in large scale industrial units such as plants.
Having the automatic restart in the time of voltage dip as a sequential starting method, this relay helps reducing the workloads of the power supply. 3 types of operating modes such as instantaneous restart, timed restart, and anti-restart are available depending on the duration of the power failure.
Limit switches:AL-S,K244 series
AL-S series limit switches feature a forced contact opening mechanism. Under abnormal conditions, the mechanism forces the contacts open to prevent pitting and fusing. Gold-plated silver contacts with scrubbing action have high reliability.
The K244 series is provided with four different kinds of contact operating actions: standard normal stroke, snap action, make-before-break, and extended stroke.
WK244 of the K244 series has bifurcated contacts, while HK244 features the scrubbing action mechanism. These limit switches can be used in the low-level circuits of 3V, 5mA.
The AL-S series limit switches feature a forced contact opening mechanism. This mechanism prevents contact welding and subsequent malfunctioning. These series therefore result in extremely dependable system controls.
FUJI K244 type limit switches have an excellent performance.
K244 limit switches employ a highly dependable and long lasting double break silver alloy contact system. These can be expected to perform more than 10 million mechanical operations and the rate of 3,000 operations per hour.
The large variety of operating modes such as standard stroke, snap-action mode, make-before-break mode, extended stroke mode, and etc. allow you to select a suitable limit switch that fully meets your needs.
K244 limit switches are widely used for industrial apparatus such as machine tools, printing machines, conveyors, automatic machines and door interlocking and similar applications. The aluminum die-cast housing can also be supplied in an oil and water proof version.
- MOTION DEVICES
- CONTROL SWITCHES
- MENICS PRODUCTS
- PA PRODUCTS
- MOTION CONTROL
- Price Lists
- LSis inverter
- Gefran DTS