Ampere meter Series
M4Y/M4W/M5W/M4M Series Panel meter for measuring DC, AC ampere M4Y/M4W/M4M/M5W series consists of various kinds of model types including indicator and single/dual preset type to allow users more diverse selection. Also, RMS/AVG value selection function contributes to better users’ convenience. Diverse functions including auto zero function, Hold function (except M5W) and 19999(M5W), 1999(others) of maximum display range are another feature of this series.
The most cost effective & advanced DeviceNet based digital remote I/O ARD Series is a DeviceNet remote I/O available in digital terminal block and sensor connector types and in analog terminal block types. A vast range of line-ups offers flexibility in user options in different work environments. Autonics ARD Series features exceptional compatibility, outstanding noise resistance and reliability. Also, this series can be installed on DIN rail or using screws.
Useful for Increasing I/O Ports of PC, PLC & LP (Autonics Logic Panel) Autonics brand new remote I/O – ARM series of Modbus RTU type following up its initial ARD series, DeviceNet remote I/O, allows you better choices. You can easily increase I/O ports when using PC, PLC and LP series(Autonics Logic Panel),and also save wire cost using ARM when connecting sensors to various controllers as well. In addition, its e-Con sensor connecting feature also saves a lot of wiring works. Its space saving compact design is just a bonus.
DIN W48×H48mm Solid-State, Power OFF Delay TIMER The 8-pin plug type Power OFF Delay timers AT8PSN/AT8PMN Series are analog timers with simple configuration and direct recognition of time setting range. The analog timers are used to preserve circuits and restart during temporary power failures.
DIN W48×H48mm Star-Delta Timer Star Delta timer AT8SDN Series is the analog timer realizing wide range of power supply (100-240VAC 50/60Hz / 24-240VDC). It is easy to check output status by built-in LED display and to control having wide range of setting time and switching time in order to satisfy customers’ needs. The series is commonly used for starting large capacity motors
DIN W48×H48mm Solid State ON Delay Timer Simple functionality timer ATE Series makes cost-effective, easy and simple time setting possible. Various time ranges provide the suitable timing solution for customers’ environment.
Miniature Analog Timers (W 22 mm x H 28 mm) Miniature analog timers ATM series feature compact, space-saving design (W 21.5 mm x H 28 mm) and simple 14-pin plug-in sockets. The ATM series is available in 11 different timing ranges (0.1 sec to 3 hr) and various power supply options. The timers feature 4PDT contact, quick reset time of 100 ms, and repeat accuracy of ±5% for highly accurate timing control.
DIN W48×H48mm, Universal voltage Multi-function Timer Free voltage Multi Function timer ATN Series realizes wide range of power supply (100-240VAC 50/60Hz / 24-240VDC, 24VAC 50/60Hz / 24VDC, 12VDC) and control time (0.05sec~100hour) to increase customer’s convenience. Moreover, it is easy to check output status by built-in LED display. The series provides suitable time solution for customers’ environment with 6 kinds of various output operation modes and 16 kinds of time range.
Wide range of power supply options & set up time all in a slim design ATS Series is a small analog multi-functional timer that allows wide ranges of power supply options and time setting options for users. This series is highly cost efficient and is equipped with a vast range of output operation modes. Also, this series gives freedom of options to users by adopting 37 different types within the line-up including Star-Delta, Power-off, Delay and Twin timers.
Programmable counter/timers New CT series adopts RS 485 communication function so that each parameter setting and monitoring can be available from PC. In addition, it allows up to 6 digit prescale setting possible to provide user convenience. Increased contact capacity of load to 5A and new design nameplate are another features of NEW CT series. ( ※ NOTE that existing CT series will be discontinued. )
16 Segment Display Unit Small 16 segment display unit D1AA series adopts both decimal (0~9) and hexadecimal (0~9, A~F)) numerical system. Also, the series realizes both NPN and PNP input method to increase user convenience. Multi-stage connection is possible with practically designed case, and input method can be chosen and changed between AC and DC for more diverse user applications. It is usually applied to PLC, computer and a wide range of display. Moreover, selectable display color – red and green – allows even diverse user selection.
7 Segment Display Unit Small 7 segment display unit D1SA series adopts both decimal (0~9) and hexadecimal (0~9, A~F)) numerical system. Also, the series realizes both NPN and PNP input method to increase user convenience. Multi-stage connection is possible with practically designed case, and input method can be chosen and changed between AC and DC for more diverse user applications. It is usually applied to PLC, computer and a wide range of display. Moreover, selectable display color – red and green – allows even diverse user selection.
- MOTION DEVICES
- CONTROL SWITCHES
- MENICS PRODUCTS
- PA PRODUCTS
- MOTION CONTROL
- Price Lists
- LSis inverter
- Gefran DTS